Qingdao Hongda Metal Forming Machinery Co., Ltd.Home > Products > Hot Forging Press >
Hot Forging Press Electric screw press Friction Screw Press Refractory press
MP Series hot forging crank press

MP series hot forging crank press is widely used in areas of automobile,
tractors,internal combustion machinery,ship,aviation,mineral ma-
chinery,petroleum machinery,hardwares and tools,also used in the 
forging and precise trimming of bulk ferrous and non-ferrous metals.


This series machine has following advantages:

  •    High precision
  •    High utilization of material
  •    High efficiency
  •    Automatic operation
  •    Low noise and light vibration


1、Whole steel casted body
More rigid than welding body, good consistency of forging jobs.

2、Connecting rod with wide support
Large rigidity ability to withstand eccentric load.
3、X type guide Rail
The guide clearance keep unchanged when heated, so can assure the smaller clearance, with smaller rail inclining and high precision of forging jobs.
4、Block inserted type friction plate
Easy to replace、good heat dissipation.
5、Built-in closed height adjust equipment
Avoid  incoming of oxide coating、mold release, etc.
6、Expansion sheath connection without pin joint
Convenient for disassemble, not reduce the shaft rigidity.

Product parameters

Main Parameters Unit  MP-630 MP-1000 MP-1600 MP-2000 MP-2500 MP-4000 MP-6300 KP-8000 KP-12500
Nominal Force kN 6300 10000 16000 20000 25000 40000 63000 80000 125000
Ram Stroke mm 220 250 16000 300 320 360 450 450 450
No. of Stroke min-1 110 100 90 85 80 55 50 40 30
Maximum Shut Height mm 630 700 875 950 1000 1250 1615 1400 1800
Height Adjustment mm 11 14 18 20 22.5 28 35 20 25
Tabel 
Dimension
Left/Right mm 690 850 1050 1210 1300 1500 1840 1700 2240
Front/Back mm 920 1120 1400 1530 1700 2050 2350 2000 3100
Ram Bottom 
Dimension
Left/Right mm 670 820 1030 1180 1260 1460 1800 1640 2190
Front/Back mm 765 930 1140 1260 1380 1710 1925 1700 2450
Upper 
Ejector
Mode Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical
Force kN 32 50 80 100 125 200 300 400 600
Stroke mm 24 30 37 40 44 52 60 70 90
Lower 
Ejector
Mode Hydraulic Hydraulic Mechanical Mechanical Mechanical Hydraulic Hydraulic Hydraulic Hydraulic
Force kN 100 150 240 300 375 600 700 1200 1200
Stroke mm 0-150 0-150 37 40 44 0-150 0-150 40-90 40-160
Main 
Motor
Power kW 55 75 110 132 160 250 355 370 530
Speed rpm 1000 1000 1000 1000 1000 1500 1000 1000 750
Voltage V 380 380 380 380 380 380 380 380 380
Overall 
Dimension
Length mm 3425 3500 3820 4469 4500 4550 6780 8358 9000
Width mm 2825 4800 5080 5130 5250 6350 7440 10248 9145
Height mm 4715 6000 6571 7326 7850 10000 11200 11570 12245
Height above the Ground mm 4480 5300 6120 6471 6850 7800 8500 8500 10530
Prev:no   Next:no