MP Series hot forging crank press Hot Forging Press Products

Hot Forging Press

查看分类

Hot Forging Press

MP Series hot forging crank press

MP series hot forging crank press is widely used in areas of automobile,
tractors,internal combustion machinery,ship,aviation,mineral ma-
chinery,petroleum machinery,hardwares and tools,also used in the
forging and precise trimming of bulk ferrous and non-ferrous metals.
1、Whole steel casted body
More rigid than welding body, good consistency of forging jobs.
2、Connecting rod with wide support
Large rigidity ability to withstand eccentric load.
3、X type guide Rail
The guide clearance keep unchanged when heated, so can assure the smaller clearance, with smaller rail inclining and high precision of forging jobs.
4、Block inserted type friction plate
Easy to replace、good heat dissipation.
5、Built-in closed height adjust equipment
Avoid incoming of oxide coating、mold release, etc.
6、Expansion sheath connection without pin joint
Convenient for disassemble, not reduce the shaft rigidity.

Product parameters

Main Parameters		Unit	MP-630	MP-1000	MP-1600	MP-2000	MP-2500	MP-4000	MP-6300	KP-8000	KP-12500
Nominal Force		kN	6300	10000	16000	20000	25000	40000	63000	80000	125000
Ram Stroke		mm	220	250	16000	300	320	360	450	450	450
No. of Stroke		min^-1	110	100	90	85	80	55	50	40	30
Maximum Shut Height		mm	630	700	875	950	1000	1250	1615	1400	1800
Height Adjustment		mm	11	14	18	20	22.5	28	35	20	25
Tabel Dimension	Left/Right	mm	690	850	1050	1210	1300	1500	1840	1700	2240
Tabel Dimension	Front/Back	mm	920	1120	1400	1530	1700	2050	2350	2000	3100
Ram Bottom Dimension	Left/Right	mm	670	820	1030	1180	1260	1460	1800	1640	2190
Ram Bottom Dimension	Front/Back	mm	765	930	1140	1260	1380	1710	1925	1700	2450
Upper Ejector	Mode		Mechanical	Mechanical	Mechanical	Mechanical	Mechanical	Mechanical	Mechanical	Mechanical	Mechanical
	Force	kN	32	50	80	100	125	200	300	400	600
	Stroke	mm	24	30	37	40	44	52	60	70	90
Lower Ejector	Mode		Hydraulic	Hydraulic	Mechanical	Mechanical	Mechanical	Hydraulic	Hydraulic	Hydraulic	Hydraulic
	Force	kN	100	150	240	300	375	600	700	1200	1200
	Stroke	mm	0-150	0-150	37	40	44	0-150	0-150	40-90	40-160
Main Motor	Power	kW	55	75	110	132	160	250	355	370	530
	Speed	rpm	1000	1000	1000	1000	1000	1500	1000	1000	750
	Voltage	V	380	380	380	380	380	380	380	380	380
Overall Dimension	Length	mm	3425	3500	3820	4469	4500	4550	6780	8358	9000
	Width	mm	2825	4800	5080	5130	5250	6350	7440	10248	9145
	Height	mm	4715	6000	6571	7326	7850	10000	11200	11570	12245
Height above the Ground		mm	4480	5300	6120	6471	6850	7800	8500	8500	10530

上一条：无

下一条：无

TEl：0532-82290337/0532-82296978
Fax：0532-82292758
E-mail：hongdaduanya@hotmail.com
Add：297 North Guangzhou Road, Jiaozhou, Qingdao, China
Contact: Mr.Alex Du