EP Series Electric Screw press Electric screw press Products

Electric screw press

Classify

Electric screw press

EP Series Electric Screw press

EP series electric screw press has the advantages of few parts, short transmission chain, simple structure, convenient operation and maintenance, stable running, low noise, etc:
Anti leaning load capacity is stronger, multi die forging capacity has more advantages;
Energy control is accurate, the product forming a good consistency;
Slide bottom dead center, not stuffy car;
Using the unique screw and flywheel connection structure;
High capacity of equipment, great fighting capacity;
The use of advanced lubrication technology, greatly extended the life of the screw pair;
Energy saving and environmental protection, the National Foundry and metalforming machinery quality supervision and inspection center, compared with the same specifications of double disc friction press, energy saving can reach more than 48.5%.

Product parameters

Main Parameters		Unit	EP-160	EP-300	EP-400A	EP-630A	EP-1000	EP-1600	EP-2500
Nominal Force		kN	1600	3000	4000	6300	10000	16000	25000
Allowing Load (Central Loading)		kN	2500	4800	6400	10000	16000	25000	40000
Moving Parts Energy		kJ	10	26	40	90	150	280	500
Ram Stroke		mm	300	400	410	500	550	650	700
No. of Stroke		min^-1	30	27	24	21	17	15	14
Mini Die Height		mm	380	400	480	600	700	800	1050
Ram Bottom Dimension	Front/Back	mm	560	660	760	920	1030	1250	1450
Ram Bottom Dimension	Left/Right	mm	540	540	600	670	800	930	1250
Table Dimension	Front/Back	mm	600	670	820	920	1000	1250	1450
Table Dimension	Left/Right	mm	560	570	730	800	900	1100	1400
Table Bolster Height		mm	120	120	120	180	180	200	280
Guide Strip Distance		mm	545	545	640	707	810	940	1260
Lower Ejecting	Mode		Pneumatic	Pneumatic	Pneumatic	Hydraulic	Hydraulic	Hydraulic	Hydraulic
	Force	kN	50	55	60	150	150	200	400
	Stroke	mm	50	50	80	150	150	200	200
Overall Dimension	Front/Back	mm	1700	1850	1910	2670	3000	3240	3890
	Left/Right	mm	2800	2800	3490	2920	3560	4050	4175
	Height	mm	3730	4300	4500	5745	6395	6920	8535
Main Motor Power		kW	22	45	55	110	132	2 x 132	2 x 220
Height above the Ground		mm	3650	4600	4260	5245	5630	6015	7335

Main Parameters		Unit	EP-4000	EP-6300	EP-8000	EP-10000	EP-12500	EP-16000
Nominal Force		kN	40000	63000	80000	100000	125000	160000
Allowing Load (Central Loading)		kN	64000	125000	128000	160000	200000	250000
Moving Parts Energy		kJ	1000	1600	2300	4000	5000	7400
Ram Stroke		mm	750	850	900	1000	1100	1200
No. of Stroke		min^-1	11	8	8	6	5	5
Mini Die Height		mm	1200	1300	1480	1700	1800	2000
Ram Bottom Dimension	Front/Back	mm	2000	2100	2400	2800	2900	3000
Ram Bottom Dimension	Left/Right	mm	1330	1450	1800	2200	2300	2400
Table Dimension	Front/Back	mm	2000	2150	2400	2800	2900	3000
Table Dimension	Left/Right	mm	1600	1800	2100	2400	2500	2700
Table Bolster Height		mm	300	320	350	350	400	400
Guide Strip Distance		mm	1380	1620	1800	2240	2380	2500
Lower Ejecting	Mode		Hydraulic	Hydraulic	Hydraulic	Hydraulic	Hydraulic	Hydraulic
	Force	kN	600	600	800	800	800	1000
	Stroke	mm	200	200	300	300	300	200
Overall Dimension	Front/Back	mm	6600	7300	8000	8200	8300	8400
	Left/Right	mm	9885/7385	7500	8300	9000	9600	9700
	Height	mm	9550	11500	13245	14000	16000	16500
Main Motor Power		kW	2x315	3x315	4x315/2x630	6x315/3x630	6x350	4 x 630
Height above the Ground		mm	8030	9300	10585	11500	13000	13500

up：nothing

next：EPZ Series Electric Refractory Press

TEl：0532-82290337/0532-82296978
Fax：0532-82292758
E-mail：hongdaduanya@hotmail.com
Add：297 North Guangzhou Road, Jiaozhou, Qingdao, China
Contact: Mr.Alex Du